Review Additive Manufacturing Methods for Thermal Energy Storage

Article Viewers
Abstract viewed: 41 timesPDF viewed: 26 times
Abstract
The field of energy storage is undergoing significant transformation through the integration of additive manufacturing (AM). However, current challenges persist in addressing the optimization of material properties, precision, and manufacturing constraints in thermal energy storage (TES) systems. The aim of this study is to review the advancements in AM techniques as applied to TES systems, focusing on their ability to enhance thermal efficiency, reduce material wastage, and improve economic viability. The methodology employed is a systematic literature review (SLR), consolidating findings from previous studies to identify the effectiveness of AM in fabricating TES components. Key findings highlight that AM enables the creation of complex structures, such as lattices and composite phase change materials (PCMs), that improve heat transfer, thermal conductivity, and system stability. For instance, optimized fin designs produced via AM have reduced conduction resistance by up to 17 times. Additionally, integrating lattice frameworks and porous matrices has enhanced energy storage capabilities by improving temperature uniformity and reducing phase change material melting times. AM demonstrates transformative potential in TES by enabling innovative designs and efficient material usage. However, further research is required to address scalability, cost-effectiveness, and high-resolution manufacturing to fully realize its application in industrial energy storage systems.
Keywords
Full Text:
PDFReferences
K. V. Wong and A. Hernandez, "A review of additive manufacturing," ISRN Mechanical Engineering, vol. 2012, Article ID 208760, pp. 1–10, 2012, doi: 10.5402/2012/208760.
R. Noorani, Rapid Prototyping—Principles and Applications, John Wiley & Sons, 2006.
J. Flowers and M. Moniz, “Rapid prototyping in technology education,” Technology Teacher, vol. 62, no. 3, p. 7, 2002.
C. K. Chua, S. M. Chou, S. C. Lin, K. H. Eu, and K. F. Lew, “Rapid prototyping assisted surgery planning,” International Journal of Advanced Manufacturing Technology, vol. 14, no. 9, pp. 624–630, 1998.
U. Gulzar, C. Glynn, and C. O’Dwyer, "Additive manufacturing for energy storage: Methods, designs and material selection for customizable 3D printed batteries and supercapacitors," Current Opinion in Electrochemistry, vol. 20, pp. 46–53, 2020, doi: 10.1016/j.coelec.2020.02.009.
Chen Z, Li Z, Li J, Liu CC, Lao C, Fu Y, Liu CC, Li Y, Wang P, He Y: 3D printing of ceramics: a review. J Eur Ceram Soc 2019, 39:661–687.
Ngo TD, Kashani A, Imbalzano G, Nguyen KTQ, Hui D: Additive manufacturing (3D printing): a review of materials, methods, applications, and challenges. Compos B Eng 2018, 143:172–196.
Ge R, Humbert G, Martinez R, et al. Additive manufacturing of a topology-optimized multi-tube energy storage device: experimental tests and numerical analysis. Appl Therm Eng. 2020;180:115878.
Freeman, T.B.; Foster, K.E.O.; Troxler, C.J.; Irvin, C.W.; Aday, A.; Boetcher, S.K.S.; Mahvi, A.; Smith, M.K.; Odukomaiya, A. Advanced Materials and Additive Manufacturing for Phase Change Thermal Energy Storage and Management: A Review. Advanced Energy Materials 2023 (accepted).
P. Singh, A. Odukomaiya, M. K. Smith, A. Aday, S. Cui, and A. Mahvi, "Processing of phase change materials by fused deposition modeling: Toward efficient thermal energy storage designs," Journal of Energy Storage, vol. 55, p. 105581, 2022, doi: 10.1016/j.est.2022.105581.
Q. Liu, R. Ge, C. Li, Q. Li, and Y. Gan, "Digital design and additive manufacturing of structural materials in electrochemical and thermal energy storage systems: a review," Virtual and Physical Prototyping, vol. 18, no. 1, e2273949, 2023, doi: 10.1080/17452759.2023.2273949.
Bin Hamzah HH, Keattch O, Covill D, Patel BA: The effects of printing orientation on the electrochemical behavior of 3D printed acrylonitrile butadiene styrene (ABS)/carbon black electrodes. Sci Rep 2018, 8:9135.
W. Andriani, “Penggunaan Metode Sistematik Literatur Review dalam Penelitian Ilmu Sosiologi,” J. PTK dan Pendidik., vol. 7, no. 2, 2022, doi: 10.18592/ptk.v7i2.5632.
B. Koçak, A. I. Fernandez, and H. Paksoy, "Review on sensible thermal energy storage for industrial solar applications and sustainability aspects," Solar Energy, vol. 209, pp. 135–169, 2020. https://doi.org/10.1016/j.solener.2020.08.081.
K. Pielichowska and K. Pielichowski, "Phase change materials for thermal energy storage," Progress in Materials Science, vol. 65, pp. 67–123, 2014. https://doi.org/10.1016/j.pmatsci.2014.03.005.
A. J. Carrillo, J. González-Aguilar, M. Romero, and J. M. Coronado, "Solar Energy on Demand: A Review on High Temperature Thermochemical Heat Storage Systems and Materials," Chemical Reviews, vol. 119, no. 7, pp. 4777–4816, 2019. https://doi.org/10.1021/acs.chemrev.8b00315.
Kaur I, Singh P. State-of-the-art in heat exchanger additive manufacturing. Int J Heat Mass Transfer. 2021;178:121600.
Li Q, Li C, Du Z, et al. A review of performance investigation and enhancement of shell and tube thermal energy storage device containing molten salt-based phase change materials for medium and high-temperature applications. Appl Energy. 2019;255:113806.
Ge R, Humbert G, Martinez R, et al. Additive manufacturing of a topology-optimized multi-tube energy storage device: experimental tests and numerical analysis. Appl Therm Eng. 2020;180:115878.
Zhang Y, Ma G, Wang J, et al. Numerical and experimental study of phase-change temperature controller containing graded cellular material fabricated by additive manufacturing. Appl Therm Eng. 2019;150:1297–1305.
Diani A, Nonino C, Rossetto L. Melting of phase change materials inside periodic cellular structures fabricated by additive manufacturing: experimental results and numerical simulations. Appl Therm Eng. 2022;215:118969.
Hu X, Gong X. Experimental and numerical investigation on thermal performance enhancement of phase change material embedding porous metal structure with cubic cell. Appl Therm Eng. 2020;175:115337.
Righetti G, Savio G, Meneghello R, et al. Experimental study of phase change material (PCM) embedded in 3D periodic structures realized via additive manufacturing. Int J Therm Sci. 2020;153:106376.
Zhang T, Deng X, Zhao M, et al. Experimental study on the thermal storage performance of phase change materials embedded with additively manufactured triply periodic minimal surface architected lattices. Int J Heat Mass Transfer. 2022;199:123452.
Moon H, Miljkovic N, King WP. High power density thermal energy storage using additively manufactured heat exchangers and phase change material. Int J Heat Mass Tran. 2020;153:119591.
Nofal M, Al-Hallaj S, Pan Y. Experimental investigation of phase change materials fabricated using selective laser sintering additive manufacturing. J Manuf Process. 2019;44:91–101.
Pizzolato A, Sharma A, Ge R, et al. Maximization of performance in multi-tube latent heat storage–optimization of fins topology, the effect of materials selection, and flow arrangements. Energy. 2020;203:114797.
Almonti D, Mingione E, Tagliaferri V, et al. Design and analysis of compound structures integrated with bio-based phase change materials and lattices obtained through additive manufacturing. The Int J Adv Manuf Technol. 2022;119(1):149–161.
Ma J, Ma T, Cheng J, et al. 3D printable, recyclable and adjustable comb/bottlebrush phase change polysiloxane networks toward sustainable thermal energy storage. Energy Storage Mater. 2021;39:294–304.
Rigotti D, Dorigato A, Pegoretti A. 3D printable thermoplastic polyurethane blends with thermal energy storage/release capabilities. Mater Today Commun. 2018;15:228–235.
Singh P, Odukomaiya A, Smith MK, et al. Processing of phase change materials by fused deposition modeling: toward efficient thermal energy storage designs. J Energy Storage. 2022;55:105581.
Yang Z, Ma Y, Jia S, et al. 3D-printed flexible phase-change nonwoven fabrics toward multifunctional clothing. ACS Appl Mater Interfaces. 2022;14(5):7283–7291.
Freeman TB, Messenger MA, Troxler CJ, et al. Fused filament fabrication of novel phase-change material functional composites. Addit Manuf. 2021;39:101839.
Wei P, Cipriani CE, Pentzer EB. Thermal energy regulation with 3D printed polymer-phase change material composites. Matter. 2021;4(6):1975–1989.
Feng C-P, Sun K-Y, Ji J-C, et al. 3D printable, form stable, flexible phase-change-based electronic packaging materials for thermal management. Addit Manuf. 2023;71:103586.
F. Anggara, R. A. Anugrah, and H. Pranoto, "Thermal Energy Storage Using Horizontal Shell-Tube Heat Exchanger: Numerical Investigation on Temperature Variation of HTF," Int. J. Renewable Energy Res., vol. 9, no. 4, pp. 1551-1560, 2019. [Online]. Available: http://www.ijrer.org/ijrer/index.php/ijrer/article/view/10798. [Accessed: 07-Jan-2025].
Orangi J, Hamade F, Davis VA, et al. 3D printing of additive-free 2D Ti3C2T x (MXene) ink for fabrication of micro-supercapacitors with ultra-high energy densities. ACS Nano. 2019;14(1):640–650.
Azhari A, Marzbanrad E, Yilman D, et al. Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes. Carbon N Y.2017;119:257–266.
Fieber L, Evans JD, Huang C, et al. Single-operation, multi-phase additive manufacture of electro-chemical double-layer capacitor devices. Addit Manuf. 2019;28:344–353.
Zhang C, Kremer MP, Seral-Ascaso A, et al. Stamping of flexible, coplanar micro-supercapacitors using Mxene inks. Adv Funct Mater. 2018;28(9):1705506.
Zhu C, Liu T, Qian F, et al. Supercapacitors based on three-dimensional hierarchical graphene aerogels with periodic macropores. Nano Lett. 2016;16(6):3448–3456.
Zhao C, Wang C, Gorkin Iii R, et al. Three-dimensional (3D) printed electrodes for interdigitated supercapacitors. Electrochem Commun. 2014;41:20–23.
Ge R, Li Q, Li C, et al. Evaluation of different melting performance enhancement structures in a shell-and-tube latent heat thermal energy storage system. Renewable Energy. 2022;187:829–843.
Qureshi ZA, Al-Omari SAB, Elnajjar E, et al. On the effect of porosity and functional grading of 3D printable triply periodic minimal surface (TPMS) based architected lattices embedded with a phase change material. Int J Heat Mass Transfer. 2022;183:122111.
Markl M, Körner C. Multiscale modeling of powder bed–based additive manufacturing. Annu Rev Mater Res. 2016;46(1):93–123.
Ge R, Flynn J. A computational method for detecting aspect ratio and problematic features in additive manufacturing. J Intell Manuf. 2022;33(2):519–535.
Grant PS, Greenwood D, Pardikar K, et al. Roadmap on Li-ion battery manufacturing research. J Phys: Energy. 2022;4:042006.
Gao X, Liu X, He R, et al. Designed high-performance lithium-ion battery electrodes using a novel hybrid model-data driven approach. Energy Storage Mater. 2021;36:435–458.
Kim J-E, Park K. Multiscale topology optimization combining density-based optimization and lattice enhancement for additive manufacturing. Int J Precis Eng Manufacturing-Green Technol. 2021;8:1197–1208.
Chen C-T, Chrzan DC, Gu GX. Nano-topology optimization for materials design with atom-by-atom control. Nat Commun. 2020;11(1):3745.
Zheng X, Deotte J, Alonso MP, et al. Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system. Rev Sci Instrum. 2012;83(12):125001.
Sun K, Wei TS, Ahn BY, et al. 3D printing of interdigitated Li-Ion micro battery architectures. Adv Mater. 2013;25 (33):4539–4543.
Guo N, Leu MC, Koylu UO. Bio-inspired flow field designs for polymer electrolyte membrane fuel cells. Int J Hydrogen Energy. 2014;39(36):21185–21195.
Zheng X, Lee H, Weisgraber TH, et al. Ultralight, ultrastiff mechanical metamaterials. Science. 2014;344(6190):1373–1377.
Choudhury S, Agrawal M, Formanek P, et al. Nanoporous cathodes for high-energy Li–S batteries from gyroid block copolymer templates. ACS Nano. 2015;9(6):6147–6157.
Liu M, Wu F, Bai Y, et al. Boosting sodium storage performance of hard carbon anodes by pore architecture engineering. ACS Appl Mater Interfaces. 2021;13 (40):47671–47683.
Chen J, Liu X, Tian Y, et al. 3D-Printed anisotropic polymer materials for functional applications. Adv Mater. 2022;34(5):2102877.
Refbacks
- There are currently no refbacks.
Share This Article
Copyright (c) 2025 Sukendar Sukendar

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
IJATEC is indexed by the following abstracting and indexing services:
The International Journal of Advanced Technology in Mechanical, Mechatronics and Material (IJATEC)
Institute for Research on Innovation and Industrial System (IRIS)
Jl.Raya Mustika Jaya No 88, Mustika Jaya, Bekasi Kota - 17158
Telp./Fax: +62 815-7499-5509
p-ISSN: 2720-8990
e-ISSN: 2720-9008
www.ijatec.com/index.php/ijatmmm

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.