Implementation of Lean Manufacturing and Waste Minimization to Overcome Delay in Metering Regulating System Fabrication Process using Value Stream Mapping and VALSAT Method Approach (Case Study: Company YS)


DOI: https://doi.org/10.37869/ijatec.v2i1.41

Article Viewers

Abstract viewed: 1211 times
PDF viewed: 672 times

Abstract


Company YS participates in managing the natural gas network by creating a Metering Regulating System (MRS), which is a tool to measure gas usage and damage to the natural gas network. Based on the data obtained, the MRS delivery process was often not in accordance with the agreed schedule, there was a delay of up to 46%, namely 50 days late from the planned schedule. To overcome these delays, waste reduction is carried out by mapping the overall condition of the company in Value Stream Mapping (VSM) and mapping in detail with the Value Stream Mapping Analysis Tools (VALSAT). In the VSM method, a Current Value Stream Mapping is carried out which then identifies the waste in which the correlation score between the wastes is described in a matrix called the Waste Relationship Matrix then followed by the calculation of the Waste Assessment Questionnaire. Then in the VALSAT method, further waste identification was carried out using seven tools. The most influential percentage of waste that has been obtained is then searched for the root cause using a fishbone diagram and then eliminated and depicted in the Future Value Stream Mapping. The most influential waste in the fabrication process is Waiting and after repairs according to the recommendations, the lead time is obtained from 41,822.60 minutes or 99 working days to 35,055.60 minutes or 83 working days so that the fabrication process can be completed 3 days faster than scheduled.


Keywords


lean manufacturing; value stream mapping; value stream mapping analysis tools

Full Text:

PDF

References

R. Muri, G. S. Gandara, A. P. Wirani, and S. Hasibuan, Analysis of Production Process to Improve Lead Time and Productivity in Fabrication by using Lean Methodology. Case Study in Turbine Component , Ijresm.Com, no. 7, 2019.

M. Kholil, Hendri, B. Hanum, and R. Setiawan, Using 7 waste approach and VSM method to improve the efficiency of mackerel fish crackers production time at small medium enterprise (SME), Proc. Int. Conf. Ind. Eng. Oper. Manag., vol. 2018-March, pp. 28192826, 2018.

M. Kholil, A. Chandra, and B. Hanum, Perencanaan Pengendalian Produksi & Logistik. Jakarta: Mitra Wacana Media, 2019.

B. Carreira, Lean Manufacturing That Works_ Powerful Tools for Dramatically Reducing Waste and Maximizing Profits. New York: AMACOM, 2005.

A. Hipni, Penerapan Lean Manufacturing Pada Perancangan Painting Plant Untuk Mengatasi Keterlambatan (Studi Kasus PT . Koba Multi Indonesia), S2 thesis, Univ. Mercu Buana Jakarta, 2019.

S. Thamizhmanii and S. Hasan, A review on an employee empowerment in TQM practice, vol. 39, no. 2, pp. 204210, 2010.

U. K.W.D., Lean Manufacturing Application in Identifying and Minimizing Waste Granite Products in the Production Division of PT XYZ, 2013.

N. West and S. Africa, LEAN IMPLEMENTATION STRATEGIES: HOW ARE THE TOYOTA WAY PRINCIPLES ADDRESSED? R. Coetzee 1#* , K. van der Merwe 2 & L. van Dyk 1 ARTICLE INFO, vol. 27, no. November, pp. 7991, 2016.

S.-G. Toma and S. Naruo, Total Quality Management and Business Excellence: The Best Practices at Toyota Motor Corporation, Amfiteatru Econ., vol. 19, no. 45, pp. 566580, 2017.

T. Wahyudi and E. All, Buku Pedoman Astra Total Quality Control. Jakarta: PT. Astra International, 1990.

A. Hirzel, M. Leyer, and J. Moormaan, The role of employee empowerment in the implementation of continuous improvement: Evidence from a case study of a financial services provider, Int. J. Oper. Prod. Manag., vol. 37, no. 10, pp. 15631579, 2017.

R. S. Mclean, J. Antony, J. J. Dahlgaard, R. S. Mclean, J. Antony, and J. J. D. Failure, Total Quality Management & Business Excellence Failure of Continuous Improvement initiatives in manufacturing environments : a systematic review of the evidence, vol. 3363, no. January, 2016, doi: 10.1080/14783363.2015.1063414.

D. Shah and P. Patel, Productivity Improvement by Implementing Lean Manufacturing Tools In Manufacturing Industry, Int. Res. J. Eng. Technol., vol. 5, no. 3, pp. 37943798, 2018.

H. Purba, D. Santoso, and J. Haekal, 5S APPLICATION TRAINING ( SEIRI , SEITON , SEIS ?, SEIKETSU , AND SHITSUKE ) TO IMPROVE THE QUALITY OF WORK ENVIRONMENT IN THE SERVICE INDUSTRY, no. 2014, pp. 20142016, 2016.

V. Gaspersz, Total Quality Management. Jakarta: PT. Gramedia Pustaka Utama, 2005.

D. Samuel, How did the publication of the book The Machine That Changed The World change management thinking ? Exploring 25 years of lean literature, Int. J. Oper. Prod. Manag., vol. 35, no. 10, pp. 129, 2015.

A. Naro and N. Halimah, PERANCANGAN LEAN PRODUCTION SYSTEM PADA LINI PRODUKSI PANEL LISTRIK TIPE WALL MOUNTING DENGAN, vol. XIII, no. 1, pp. 6171, 2019.

M. Braglia, G. Carmignani, F. Aldo, Z. Icpr, and A. New, 18th ICPR paper : A NEW VALUE STREAM MAPPING APPROACH FOR COMPLEX PRODUCTION SYSTEMS Marcello Braglia, Gionata Carmignani , Francesco Aldo Zammori To cite this version :, 2010.

R. K. Mahendra and A. Susanty, Analisis Efisiensi Kinerja Proses Produksi Briket Dengan Metode Value Stream Analysis Tools ( VALSAT ) di CV Mega Briquette Semarang.

I. S. A, R. N. R, and F. Rachman, Analisis Waste dengan Menggunakan Value Stream Analysis Tools ( Valsat ) pada Proses Produksi Klip ( Studi Kasus di PT . Indoprima Gemilang Engineering), pp. 400406.

M. Kholil and R. Mulya, Minimasi Waste Dan Usulan Peningkatan Efisiensi Proses Produksi Mcb (Mini Circuit Breaker) Dengan Pendekatan Sistem Lean Manufacturing (Di PT Schneider Electric Indonesia), vol. VIII, no. 1, pp. 4470.

E. Supriyanto, K. Program, S. Teknik, I. Fakultas, and U. N. Bandung, manufaktur dalam dunia teknik industri, vol. 3, no. 3, pp. 36, 2013.

J. Heizer and B. Render, Operations Management -10th Edition 2011 - JayHeizer & Barry Render.pdf. Pearson Education Inc., New Jersey, p. 890, 2011.

S. Wenchi, J. Wang, X. Wang, and H. Chong, AN APPLICATION OF VALUE STREAM MAPPING FOR TURNAROUND MAINTENANCE IN OIL AND GAS INDUSTRY : CASE STUDY AND LESSIONS LEARNED, no. September, pp. 813822, 2015.

D. Luiz et al., A lean six sigma framework for continuous and incremental improvement in the oil and gas sector, vol. 11, no. 3, pp. 577595, 2019, doi: 10.1108/IJLSS-02-2019-0011.

E. Amrina, N. T. Putri, and D. M. Anjani, Waste assessment using lean manufacturing in rubber production Waste assessment using lean manufacturing in rubber production, 2019, doi: 10.1088/1757-899X/528/1/012051.

M. F. Septiani and et al, The reduction of waste on pile production process using value stream analysis tool ( VALSAT ) method The reduction of waste on pile production process using value stream analysis tool ( VALSAT ) method, IOP Conf. Ser. Mater. Sci. Eng., vol. 697, no. 012006, 2019, doi: 10.1088/1757-899X/697/1/012006.

Adriansyah;, A. Sutanto, and B. Yuliandra, Aplikasi Konsep Produksi Ramping untuk Memperbaiki Efisiensi Pengolahan Minyak Kelapa Sawit, J. Energi dan Manufaktur, vol. 11, no. 2, pp. 3641, 2018, doi: 10.24843/JEM.2018.v11.i02.p01.

I. A. Rawabdeh, A model for the assessment of waste in job shop environments, 2004, doi: 10.1108/01443570510608619.

A. Mughni, Penaksiran waste pada proses produksi sepatu dengan waste relationship, 2005.


Refbacks

  • There are currently no refbacks.

Share This Article



Copyright (c) 2021 International Journal of Advanced Technology in Mechanical, Mechatronics and Materials